Savings from commercial solar panels in the UK: how much could your business save?

Savings from commercial solar panels in the UK: how much could your business save?

Published: 4 November 2026

Article summary

  • A 500 kWp solar system could save roughly £56,250 to £78,750 a year on electricity bills, depending on how much of its electricity a business uses on site. This figure assumes grid electricity at 25p/kWh and a yield of 900 kWh per kWp.
  • At 70% used on site, the 500 kWp solar system could deliver more than £2.1 million in total financial benefit over 25 years, before any increase in electricity prices is factored in.
  • Electricity generated by solar PV has an equivalent rate of approximately 5p/kWh over the system’s lifetime, around 80% cheaper than grid-supplied electricity at 25p/kWh.

Important: This guide provides general information and worked examples to help you understand the overall financial picture. It should not be relied upon as financial, investment or tax advice. Energy prices fluctuate, and the savings available depend on your specific circumstances. Please consult a qualified financial adviser before making investment decisions.

Introduction

Commercial solar panels can significantly reduce a business’s electricity costs, with many installations capable of reducing annual grid electricity usage by 30–50%. However, savings depend on how much electricity your business uses, when it uses it, and how effectively the solar installation is designed around that demand.

The economics are compelling. Electricity generated by a commercial solar installation can cost the equivalent of approximately 5p per kilowatt-hour (kWh) over its operating life, compared with grid electricity prices of around 20–25p/kWh.1

With investment payback periods typically below five years and systems that can generate electricity for 25–30 years or longer, solar power lets businesses lower operating costs while creating a valuable long-term energy asset. Solar power also offers environmental benefits, helping businesses meet sustainability goals.

A hand adding a coin to stacks of coins with seedlings growing from them, in warm light

How much could a 500 kWp commercial solar installation save?

A 500 kWp system could save a business around £56,250 a year on its electricity bill if it uses 50% of the electricity on site, or £78,750 a year at 70%. That assumes grid electricity at 25p/kWh.

A solar system can generate more electricity than the building is using at the time. The business can export that surplus to the grid and is usually paid for it. Electricity purchased from the grid might cost a business 20–25p/kWh, while surplus solar electricity exported to the grid might generate approximately 5–10p/kWh. At an import rate of 25p/kWh and an export rate of 5p/kWh, consuming solar electricity on-site is worth five times as much as exporting it.

50% used on site 70% used on site
Saving on electricity bill £56,250 £78,750
Payment for exported electricity £11,250 £6,750
Total annual financial benefit £67,500 £85,500
Payback period (on total benefit) 5.6 years 4.4 years

Going from 50% to 70% adds £18,000 a year in total financial benefit from the same panels. For this reason, Ineco will often target approximately 70% on-site use when optimising a commercial solar investment. Ultimately, the largest possible solar installation is not necessarily the one that delivers the strongest financial return.

Illustrative figures for a £375,000 system (£750 per kWp) generating 450,000 kWh a year (900 kWh per kWp). They exclude maintenance, financing and tax. Actual savings depend on the building, how it uses electricity and its tariff.

How the figures are worked out

50% used on site 70% used on site
Annual solar generation 450,000 kWh 450,000 kWh
Electricity consumed on-site 225,000 kWh 315,000 kWh
Electricity exported 225,000 kWh 135,000 kWh
Avoided electricity purchases £56,250 £78,750
Export revenue £11,250 £6,750
Total annual financial benefit £67,500 £85,500
Indicative installation cost £375,000 £375,000
Simple payback 5.6 years 4.4 years

What are the long-term savings from commercial solar?

Modern solar PV systems are designed to generate electricity for 25–30 years or longer, giving businesses the opportunity to generate millions of pounds in lifetime financial benefits. Take our 500 kWp example. At 70% used on site, the installation delivers approximately £85,500 in annual financial benefits. Over 25 years, that equates to more than £2.1 million, increasing to approximately £2.6 million over 30 years. Both figures assume electricity prices stay at 25p/kWh throughout.

With energy prices likely to fluctuate over the coming decades, generating your own electricity provides greater protection against future energy cost increases. Although solar installations degrade gradually and they require ongoing maintenance, these costs are relatively modest compared with the potential lifetime financial benefits.

Fully funded options are also available, with zero capital outlay and cash-flow-positive returns from day one.

What determines savings from commercial solar panels?

Four principal factors influence the actual financial returns from a commercial solar system.

1. The price you pay for electricity

The higher your electricity tariff, the greater the financial benefit of generating and consuming your own electricity. A business paying 25p/kWh will save more per unit of solar electricity consumed than one paying 15p/kWh, assuming other factors remain equal.

2. How much solar electricity you consume on-site

Electricity generated and consumed directly by your business replaces electricity that would otherwise come from the grid. The closer your electricity consumption aligns with solar generation, the greater the financial benefit. This is why understanding when a business uses electricity is just as important as understanding how much it uses.

3. How much electricity your solar installation generates

Available roof space, geographical location, orientation, inclination and shading all influence annual electricity generation. Solar panels generate electricity year-round, including in winter and overcast conditions, although output is generally greatest between spring and autumn when daylight hours are longer.

4. The cost of designing and installing the system

Roof construction and condition, electrical infrastructure, grid connection requirements, access arrangements, site logistics and health and safety considerations all influence installation costs. Two buildings with identical electricity consumption could therefore have different investment returns because of their individual site requirements.

Electricity pylons silhouetted against an orange dusk sky

Why does your business’s electricity consumption profile matter?

Not all businesses consume electricity the same way, and these differences can significantly affect the overall savings commercial solar systems can deliver.

Manufacturing facilities

Manufacturing facilities often have substantial, consistent electricity demand throughout their operating hours. This creates opportunities to consume a high proportion of solar generation directly on-site.

Machine lines and workers in a large manufacturing production hall

Cold storage

Cold storage is another particularly attractive application. Refrigeration equipment operates throughout the day, and demand can increase during warmer weather, when solar generation is also typically higher.

Crates of fresh produce in a cold store, with refrigeration units on the ceiling

Logistics and distribution centres

Logistics and distribution centres have historically presented a different opportunity. Many large warehouses had relatively modest electricity consumption despite their enormous roof areas, particularly where their primary function was storing and distributing goods. Consequently, the optimum solar installation could be significantly smaller than the available roof space might suggest.

However, this is changing. The electrification of commercial vehicle fleets, together with increasing automation and robotics, is driving additional electricity demand across logistics operations.

Dextra's Unit 27 warehouse with Ineco rooftop solar and trailers at the loading bays

Retail businesses

Retail businesses can have very different electricity consumption profiles depending on their operations. Supermarkets, for example, often have substantial and consistent demand from refrigeration, freezers, lighting and ventilation, making them particularly well suited to solar generation. In contrast, hardware or general merchandise stores, where electricity demand is predominantly associated with lighting, heating and ventilation, may have considerably lower consumption relative to their floor area.

Supermarket freezer aisle with an empty shopping trolley

Other commercial buildings

Other commercial buildings, such as leisure centres, theatres and cinemas, may have more variable consumption patterns. Their electricity demand can fluctuate considerably depending on operating hours, occupancy and activities.

Spin studio at Abbey Stadium leisure centre in Redditch

This is why a detailed understanding of a building’s electricity consumption is fundamental to designing an effective commercial solar installation. At Ineco Energy, we typically begin with at least 12 months of half-hourly electricity consumption data. This allows our engineers to understand not only how much electricity a business consumes, but precisely when it is required.

Real-world example: solar savings for a major UK furniture retailer

At the distribution centre of a major UK furniture retailer, Ineco installed a rooftop solar PV system with a capacity of approximately 300 kWp. In its first ten months of operation, the installation generated more than 185,000 kWh of electricity, exceeding forecast generation by approximately 2.6%. Almost 97% of the electricity generated was consumed directly on-site, reducing the facility’s reliance on grid electricity. At illustrative electricity rates of 25p/kWh for avoided imports and 5p/kWh for exports, this represents approximately £45,000 in financial benefits over the reporting period.

How can you calculate the potential savings for your business?

Every commercial building is different, and developing a credible financial business case takes more than calculating how many solar panels fit on a roof. A comprehensive assessment should consider:

  • Electricity consumption: At least 12 months of half-hourly data to understand when and how electricity is used.
  • Financial considerations: Electricity tariffs, installation costs, export revenues and anticipated investment returns.
  • Solar generation: Site location, roof orientation, inclination, shading and expected system performance.
  • Building suitability: Roof condition, structural capacity, access arrangements and existing electrical infrastructure.
  • Compliance and insurance: Applicable building regulations, fire safety requirements, insurer specifications, electrical standards and grid connection requirements.
  • Future requirements: Planned business expansion, automation, battery storage or fleet electrification.

At Ineco Energy, our engineers assess these requirements alongside detailed financial modelling, evaluating different system configurations to understand their technical feasibility, compliance and commercial performance. This involves balancing capital expenditure against electricity generation, the share of electricity used on site, export revenue and long-term investment returns to identify the most appropriate solution for each business.

Ineco designer laying out a commercial solar system across two screens

Where should your business start?

For many businesses, commercial solar represents an opportunity to reduce electricity expenditure, improve long-term cost certainty and generate their own low-cost electricity. However, there is no one-size-fits-all solution. The financial returns depend on the relationship between electricity consumption, solar generation, installation cost and the commercial objectives of the business. The starting point should always be understanding how and when electricity is consumed, before designing a system around those requirements.

At Ineco Energy, our approach is to engineer commercial solar installations around the needs of each business, ensuring that investment decisions are supported by detailed technical assessment and realistic financial modelling. For businesses considering commercial solar, the first step is to establish what their electricity consumption data reveals about the opportunity.

Commercial solar panel FAQs

The benefits are greatest for sites that use most of their electricity during daylight hours. The case is strongest for commercial property, manufacturing, retail, and logistics sites, which often have large roof sizes and high daytime demand.

Typically, a commercial solar PV system can supply between 30% and 50% of your total electricity demand for the year, although this depends on your site’s electricity demand and its solar generation.

One of the most important considerations when designing a commercial solar installation is the proportion of electricity that will be consumed directly on-site. For this reason, Ineco will often target approximately 70% on-site use when optimising a commercial solar investment.

This is not a fixed rule. Some businesses can achieve substantially higher on-site use, while others may benefit from larger installations that export more electricity. The objective is to establish the most appropriate balance between installation cost, electricity generation, on-site consumption and export revenue. In some circumstances, maximising roof coverage may also be desirable to accommodate future electricity demand, particularly where businesses are planning fleet electrification, increased automation or operational expansion.

Commercial solar installations commonly achieve indicative simple payback periods in less than five years, although individual projects can fall outside this range. The actual return depends on the initial investment, electricity prices, the share of electricity used on site, export revenue and ongoing operating costs. For businesses that purchase their installation outright, solar can provide substantial financial benefits once they recover the initial capital investment.

A well-designed commercial solar system can last 25 years or more, with panels typically backed by 25- to 30-year performance guarantees. Regular maintenance and an O&M contract protect the investment and extend component life throughout.

Eligible businesses may benefit from capital allowances, which can improve the overall investment case. Solar panels count as special-rate plant and machinery, and three main allowances can apply, significantly reducing the tax on qualifying expenditure.2

  • The Annual Investment Allowance (AIA) gives 100% relief on qualifying spend up to £1 million per accounting period.
  • Companies can then claim a 50% first-year allowance on qualifying spend above that, provided the equipment is new and unused.
  • Any remaining balance goes into the special-rate pool, where it is written down at 6% in each accounting period.

Entitlement generally sits with whoever owns the system, so the treatment differs under asset finance, leases and PPAs. This is general guidance only and does not constitute tax advice. Your accountant or tax adviser can confirm how it applies to your business.

Outright ownership is not the only option. Asset finance, hire purchase and Power Purchase Agreements (PPAs) can allow businesses to benefit from solar generation without committing the full installation cost upfront. Depending on the financing arrangement and commercial terms, some solutions can provide positive cash flow from day one.

In this scenario there are still major benefits to installing on-site solar. It may increase the property’s value and the speed at which it can be let, given the advantages for tenants. It should also enable landlords to generate a return from any leasing agreement, for example for the roof space used to install a solar system.

The government has announced minimum energy efficiency standards for commercial property that mean landlords need to comply in order to rent out their commercial properties. Furthermore, many landlords have sustainability targets with solar PV being one of the most cost-effective and easiest ways to meet these targets.

Load More

How Ineco can help

Ineco helps UK businesses reduce electricity costs and generate their own on-site energy through commercial solar PV and battery storage systems.

From rooftop solar and solar carports to ground-mounted installations and battery storage, our engineering-led approach ensures every solution is tailored to the site’s requirements and commercial objectives.

We manage the entire project lifecycle, from initial feasibility assessments through development, engineering and construction to ongoing operations and maintenance.

Interested in understanding the potential for your business?

Get in touch with our team to explore the opportunities for your site and discover how solar energy can deliver long-term savings, greater energy security and a more sustainable future. Call 029 2002 1777, email us at info@inecoenergy.com, or complete our form below.

References

  1. DESNZ, Quarterly Energy Prices: September 2026, published 29 September 2026.
  2. GOV.UK, Claim capital allowances (annual investment allowance; full expensing and 50% first-year allowance; writing down allowance rates and pools), checked 23 October 2026.

Written By

Avatar photo

Angus Rose

Director at Ineco Energy

Angus Rose is a Director at Ineco Energy, bringing over a decade of expertise in delivering innovative energy solutions to public and private sector clients. Passionate about renewable energy and its critical role in addressing climate change, he is committed to driving a sustainable future. In 2016, Angus co-founded Ineco Energy with a clear mission: to deliver clean energy for better business and a better world. Under his leadership, the company has become a trusted partner in the renewable energy sector, specialising in commercial and industrial rooftop solar projects. From initial consultation to project completion, Ineco Energy manages the entire lifecycle, ensuring seamless execution and long-term impact. With a strong focus on energy efficiency and sustainability, Angus continues to lead initiatives that help businesses reduce their carbon footprint and reliance on the grid while maximising financial benefits.